Intended Use

General Description

The SD/SDV-Series screwdriver tools are intended for use as end-of-arm tooling on industrial robots in automated screwdriving applications.

Screwdriving applications are defined as fastening operations using:

  • Threaded fasteners

  • Self-cutting screws

  • Thread-forming screws

The tool is designed to be integrated into a complete robot system.

Operating Conditions

The tool is intended for operation under the following conditions:

  • Indoor use only

  • Dry environment (non-condensing)

  • Ambient temperature: 0–50 °C

  • Relative humidity: max. 85 %

  • Maximum operating altitude: 2000 m

Intended Application Scope

The SD/SDV-Series is specifically designed for:

  • Automated screwdriving processes

  • Controlled fastening operations

  • Use with compatible screw bits and accessories

The tool must be used in accordance with the specifications, instructions, and limitations described in this manual.

Reasonably Foreseeable Misuse

Any use outside the intended use is considered misuse.

Examples include, but are not limited to:

  • Use in explosive or flammable atmospheres (ATEX)

  • Use in medical or life-critical applications

  • Use without performing a risk assessment

  • Use without proper training of operators and personnel

  • Use outside specified environmental or operational conditions

Prohibited Use

The following uses are strictly prohibited:

  • Use near human head, face, or eye area

  • Use for processes other than screwdriving (e.g., polishing, grinding, deburring)

  • Use as a press, pry bar, drill, cutter, or hammer

  • Manual guiding outside intended collaborative operation

  • Operation without required safety functions enabled

  • Performing maintenance or tool changes with power applied (no lockout/tagout)

  • Cleaning with high-pressure water, steam, or incompatible chemicals

  • Use with incorrect or damaged electrical or pneumatic connections