SD/SDV-Series

SD and SDV variants share identical technical specifications.

Model Overview

Model	Torque (Nm)	Speed (rpm)	Screw size	Weight
SD/SDV35	0.3 – 3.3	15 – 730	M2.5 – M5	2.4 kg
SD/SDV50	0.5 – 5.0	15 – 510	M2.5 – M5	2.4 kg
SD/SDV70	0.8 – 7.0	15 – 350	M3 – M6	2.4 kg
SD/SDV120	2.0 – 12.0	15 – 180	M5 – M8	2.5 kg

The specified screw capacity is indicative and reflects typical screw sizes within each tool’s torque range. Smaller or larger screws may be used depending on the application, material and process conditions — an SD/SDV120 can drive M4, and an SD/SDV35 or SD/SDV50 can drive M6. Base the final tool selection on the required torque and the application conditions.

Model-Specific Specifications

Parameter	SD/SDV35	SD/SDV50	SD/SDV70	SD/SDV120
Torque range (Nm)	0.3 – 3.3	0.5 – 5.0	0.8 – 7.0	2.0 – 12.0
Torque accuracy	±10 %	±10 %	±10 %	±10 %
Speed (rpm)	15 – 730	15 – 510	15 – 350	15 – 180
Screw capacity	M2.5 – M5	M2.5 – M5	M3 – M6	M5 – M8

Mechanical

Parameter	Value
Dimensions	52 × 325 × 159 mm
Safety shield diameter	Ø15 mm
Max screw length (safe)	35 mm
Supported screw types	Machine, self-cutting, self-forming
Robot interface	ISO 9409-1 (50-4-M6)

Electrical

Parameter	Value
Power (from Spin Bridge)	42–54 V DC @10 A
Motor power	70 W (continuous)
Electrical interface	8-pin M12 (comm.) 4-pin M12 (power)

All electrical power for the tool is supplied by the Spin Bridge. See Electrical Interfaces for system integration.

Environmental

Parameter	Value
Temperature range	0 – 50 °C
IP classification	IP53
ESD safe	Yes

Vacuum Interface (SDV only)

Parameter	Value
Connection type	Push-in
Tube size	6 mm (OD)
Thread	M5
Minimum vacuum level	≥ 60 % (−0.6 bar)
Vacuum type	Continuous

Vacuum must be supplied externally by the integrator. The system is not fully sealed, so continuous vacuum is required.